Springfield Research Corp.

Tel: +1 (954) 657 8849

Fax: +1 (954) 657 8895

3350 NW 22nd Ter Suite 500

Pompano Beach, FL - 33069 - USA

© 2019 by To10.com.br

 
logo-white.png
mexico.png
usa.png

OUR PRODUCTS

Springfield products are manufactured with the highest technology and equipment, fully tested and calibrated before shipment. Our specific knowledge and experience will assure conformance to process control standards and requirements. With HART, FM and ATEX conformance, we deliver our technology assuring the best quality and keeping your project schedule on time.

 

Product Line 914

914A Pressure Transmitter Absolute

The 914A is an industrial-grade absolute pressure instrument ideal for use in process control. The mechanical sensor is based off capacitance transducer technology. The output provides signal with HART communication. Powered by a high performance CPU this instrument is able to perform high precision thermal compensation plus many diagnosis procedures to assure its reliability.

  • Absolute pressure capacitive transmitter.

  • Low maintenance, quick calibration and configuration.

  • Installation directly into pressurized vessels.

  • HART technology provides ease of setup and diagnostics during operation.

  • Pressure port for thread 1/4 “NPT or 1/2” NPT adapter.

  • Capacitance based differential pressure transmitter.

  • Low maintenance, quick calibration and configuration.

  • Installation directly into pressurized vessels.

  • HART technology provides ease of setup and diagnostics during operation.

  • Pressure port for thread 1/4 “NPT or 1/2” NPT adapter.

  • Pressure measurement from 20mbar to 200bar;

914D Pressure Transmitter Differential

The 914D is an industrial-grade differential pressure instrument ideal for use in process control. The mechanical sensor is based off capacitance transducer technology. The output provides a 4/20mA signal with HART communication. Powered by a high performance CPU this instrument is able to perform high precision thermal compensation plus many diagnosis procedures to assure its reliability.

914G Pressure Transmitter Gauge

The 914G is an industrial-grade gauge pressure instrument ideal for use in process control. The mechanical sensor is based off pressure transmitter for stain gage resistance, built off a ceramic diaphragm that provides accuracy. The output provides a 4/20mA signal with HART communication.   Powered by a high performance CPU this instrument is able to perform high precision thermal compensation plus many diagnosis procedures to assure its reliability.  Differential Pressure transmitters have a limitless number of industrial applications.

  • HART technology 4/20mA ideal for acquisition of data and process control.

  • Pressure measurement from 4bar to 350bar.

  • Overpressure and static pressure suitable for industrial installations.

  • Compatible with many liquids, steam and gases.

  • Suitable for pressure measurement and level.

  • Compatible with tubes and pipe connections, option for flanges and remote seal.

914L Pressure/Level Transmitter

The 914L is an industrial-grade pressure instrument ideal for use in process control. The mechanical sensor is based off pressure transmitter for stain rage resistance, built off a ceramic diaphragm that provides accuracy and thickness. The output provides a 4/20mA signal with HART communication. Powered by a high performance CPU this instrument is able to perform high precision thermal compensation plus many diagnosis procedures to assure its reliability. Differential Pressure transmitters have a limitless number of industrial applications. 

  • Capacitive level transmitter for liquids.

  • Low maintenance, easy calibration and configuration.

  • Easy installation directly into pressurized vessels.

  • HART technology provides ease of setup and diagnostics during operation.

  • Easy installation for DIN or ASME flanges.

914M Pressure Transmitter Gauge

The 914M is an industrial-grade gauge pressure instrument ideal for use in process control. The mechanical sensor is based off capacitance transducer technology. The output provides signal with HART communication. Powered by a high performance CPU this instrument is able to perform high precision thermal compensation plus many diagnosis procedures to assure its reliability.

  • Capacitive gauge pressure transmitter.

  • Low maintenance, quick calibration and configuration.

  • Installation directly into pressurized vessels.

  • HART technology provides ease of setup and diagnostics during operation.

  • Pressure port for thread 1/4 “NPT or 1/2” NPT adapter.

914R GWR Radar Level Transmitter

The 914R is an intelligent HART level transmitter designed to detect liquid or solid levels in vessels. The 30 301 sends and receives radio frequency pulses through the probe using guided wave radar (GWR) techniques for the purpose of level detection. These pulses travel down the probe until the product surface is reached and are then reflected and received back at the device. Using Time Domain Reflectometry (TDR) principles, the 914R is able to effectively calculate the level of the measured product from these received pulses. The 914R level information can be output as a user configurable 4-20mA signal or monitored remotely via the HART protocol.

  • Guided wave radar level transmitter.

  • Low maintenance, auto calibrated references.

  • Easy installation, directly in tanks or auxiliary vessels.

  • HART technology provides ease of setup and diagnostics during operation.

  • Easy installation, 1 1/2 “NPT thread enables numerous options.

914S Pressure Transmitter Sanitary

The 914S is an industrial-grade differential pressure/level instrument ideal for use in process control. The mechanical sensor is based off capacitance transducer technology. The output provides a 4/20mA signal with HART communication. Powered by a high performance CPU this instrument is able to perform high precision thermal compensation plus many diagnosis procedures to assure its reliability. Differential Pressure/level transmitters have a limitless number of industrial applications. 

  • Capacitive Sanitary Pressure Transmitter

  • Low maintenance, quick calibration and configuration.

  • Installation directly into pressurized vessels.

  • HART technology provides ease of setup and diagnostics during operation.

  • Facility in installation, model TRICLAMP, RTJ, IDF, SMS, DIN11851.

914T Temperature Transmitter

The 914T is an industrial-grade differential pressure/level instrument ideal for use in process control. The mechanical sensor is based off capacitance transducer technology. The output provides a 4/20mA signal with HART communication. Powered by a high performance CPU this instrument is able to perform high precision thermal compensation plus many diagnosis procedures to assure its reliability. Differential Pressure/level transmitters have a limitless number of industrial applications. 

  • Temperature transmitter, mV, Ohm.

  • Low maintenance, easy calibration and configuration.

  • High precision input with minimum galvanic isolation of 500Vdc.

  • HART technology provides ease of setup and diagnostics during operation.

  • Compatible with Thermocouple or RTD sensors, and mV or Ohm type transducers

  • Support for differential thermal measurement or 2 measurement points.

914DNS Pressure/Density Transmitter

The 914DNS is an industrial-grade differential pressure/level instrument ideal for use in process control. The mechanical sensor is based off capacitance transducer technology. The output provides a 4/20mA signal with HART communication. Powered by a high performance CPU this instrument is able to perform high precision thermal compensation plus many diagnosis procedures to assure its reliability. Differential Pressure/level transmitters have a limitless number of industrial applications. 

  • Low maintenance, easy calibration and configuration.

  • HART technology provides ease of setup and diagnostics during operation.

914SRT Pressure Transmitter with Remote Seals
  • Pressure transmitter with remote seals.

  • Low maintenance, easy calibration and configuration.

  • Easy installation directly into pressurized vessels.

  • HART technology provides ease of setup and diagnostics during operation.

  • Easy installation for DIN or ASME flanges with or without extension  flange->diaphragm.

  • Available in diameters from 1” to 4” (DN25 to DN100) pressure rating from 150 to 600 psi (PN10 to PN40)

Semiconductors

HT2015-LQ HART Modem

The HT2015 is a mixed signal CMOS modem designed for HART field instruments and associated interfaces. This component require few external passive elements to provide the functions needed to satisfy HART physical layer requirements. It have built in circuitry for modulation, demodulation, receive filtering, carrier detect, and transmit signal shaping.
The HT2015 is ideal for low power field instruments (4 to 20mA) and can be used also for computer interfaces for data acquisition and control. It uses phase continuous frequency shift keying (FSK) at 1200 bits per second as specified in HART protocol. It work in half duplex mode to save power.

  • Ideal for HART field instruments, configurators, data acquisition and digital control.

  • Bell 202 FSK at 1200 and 2200 Hz, nominal 1200 bits per second, half duplex.

  • Mixed signal CMOS technology, working from 3.0 to 5.5V Power Supply.

  • Built in transmit wave shaping, receiver band pass filter, with few external passive components.

  • Work with most micro controllers available in the market, I/O CMOS/TTL compatible.

  • Industrial temperature -40 to 85C, Pb-Free chip packaging.

  • Based on HART physical layer.

HT2012-PL HART Modem

The HT2012 is a CMOS modem designed for HART field instruments and associated interfaces. This component require some external active and passive elements to provide the functions needed to satisfy HART physical layer requirements including modulation, demodulation, receive filtering, carrier detect, and transmit signal shaping.
The HT2012 is ideal for low power field instruments (4 to 20mA) and can be used also for computer interfaces for data acquisition and control. It uses phase continuous frequency shift keying (FSK) at 1200 bits per second as specified in HART protocol. It work in half duplex mode in order to save power.

  • Ideal for HART field instruments, configurators, data acquisition and digital control

  • Bell 202 FSK at 1200 and 2200 Hz, nominal 1200 bits per second, half duplex.

  • CMOS technology, working from 3.0 to 5.5V Power Supply, extra low current 40uA.

  • Transmit wave shaping, receiver band pass filter, with few external components.

  • Work with most micro controllers available in the market, I/O CMOS/TTL compatible.

  • Industrial temperature -40 to 85C, Pb-Free chip packaging.

  • Based on HART physical layer.

 

Software/Interface

HmUSB HART Modem

The Computer Modem HmUSB is a complete communication path for a HART network.  It will enable personal computers to read and or configure data within HART devices.  The computer USB connector provides operating energy for the modem, eliminating the need for extra power supply, while the HART loop connector is electrically isolated from the computer terminals. These are key features for process control network. The HmUSB is able to work with most configuration software in the market, being a reliable and cost effective option.

  • Ideal for configurations, data acquisition and digital control.

  • Factory tested to work with all HART field devices.

  • Extremely low leakage current ( < 1 uAdc ) will not interfere with current loop.

  • Compatible with USB type A connector or type B with adaptor cable.

  • Galvanic isolation between HART and USB port greater than 250V.

  • Small size and light weight enclosure, ​no need for extra power supply.

Hi232 HART Modem

The Computer Modem HI232 is a complete communication path for a HART network.  It will enable personal computers to read and or configure data within HART devices.  The computer RS-232 connector provides operating energy for the modem, eliminating the need for extra power supply, while the HART loop connector is electrically isolated from the computer terminals. These are key features for process control network. The HI232 is able to work with most configuration software in the market, being a reliable and cost effective option.

  • Ideal for configurations, data acquisition and digital control.

  • Factory tested to work with all HART field devices.

  • Extremely low leakage current ( < 1 uAdc ) will not interfere with current loop.

  • Compatible with RS-232 type DB-9 connector or type DB-25 with adaptor cable.

  • Galvanic isolation between HART and RS-232 port greater than 500V.

  • Small size and light weight enclosure, no need for extra power supply.

HiBLUE HART Modem

The HiBLUE HART Modem is a wireless design for HART networks. It will enable personal computers to read and confi gure data in HART devices. The wireless Bluetooth antenna provides connection for the HART network
and the wireless computer, the battery charger is also electrically isolated from the HART terminals. These are key features for process control network. The HIBLUE is able to work with most communicators in the market, being a reliable and cost eff ective option.
 

  • Ideal for confi gurations, data acquisition and digital control.

  • Factory tested to work with all HART fi eld devices.

  • Extremely low leakage current ( < 1 uAdc ) will not interfere with current loop.

  • Compatible with Bluetooth 2.0 connector, RF Antenna FCC id T9JRN41-3

  • Full isolation between HART network and computer chassis and battery charger.

  • Small size and light weight enclosure, long battery life.

HIUSB HART Interface for protocol USB

The Computer Modem HIUSB is a complete communication path for a HART network. It will enable personal computers to read and or configure data within HART devices. The computer USB connector provides operating energy for the modem, eliminating the need for extra power supply, while the HART loop connector is electrically isolated from the computer terminals. These are key features for process control network. The HIUSB is able to work with most configuration software in the market, being a reliable and cost effective option.

  • Ideal for configurations, data acquisition and digital control.

  • Factory tested to work with all HART field devices.

  • Extremely low leakage current (< 1 uAdc) will not interfere with current loop.

  • Compatible with USB type A connector or type B with adaptor cable.

  • Galvanic isolation between HART and USB port greater than 500V.

  • Small size and light weight enclosure, no need for extra power supply.

HPCOM HART Communicator (Replaced by HPC+Droid)

The HPCOM is a reliable HART hand held configurator for field devices. Its small size, light weight robust and ergonomic design is easy to carry on your own pocket or tool box, its proven reliability can  simplify configuration or data analysis in the field. The HPCOM has communication compatibility with all HART field instruments, currently have available software drive for over 350 existing HART instruments. More device driver can be arranged upon HART DDL/EDDL source files, or custom specification.
The HPCOM is mainly used at process control plants for commissioning, diagnosis, data monitoring and configuration changes of HART instruments. The Lithium Ion rechargeable battery will allow a full day of work under reasonable usage, this feature plus size, light weight and software functionality will assure a good return of investment.
Hand held configuration and monitoring for HART field instruments at the field or control room.

  • HART interface plugged with robust industrial connector.

  • Software driver for over 350 existing HART instruments.

  • New driver can be developed upon customer specification or DDL source file.

  • Lithium Ion battery charge for 24 hours operation (at 360 HART messages/hour.)

  • Large non volatile memory storage for software and at least 500 device drivers.

  • Easy to upgrade or add new device driver.

  • Smallest, lightest, and smartest carry on HART communicator available today.​

HPC+DROID HART Communicator

The HPC+droid is a reliable HART hand held configurator
for field devices. It simplifies configuration and data
analysis in the field. The HPC+droid has communication
compatibility with all HART field instruments used at
process control plants for commissioning, diagnosis,
data monitoring and configuration changes of HART
instruments The new HPC+droid is not just a hand held, it is a tool out
of the fragile norm of computers. Built for strength and
endurance and yet utilizing the latest communication
technologies and electronics. It is chock proof in
conformance to MIL-SPEC 810G and water proof in
conformance to IP68, meaning submersion of 1 meter of
water for 1 hour, and drop resistance of 1.8 meters directly
into concrete floor. On the bottom of all it is a cell phone, ideal tool for use on construction sites, oil refineries, industrial plants, offices,
and at home.

  • HART communicator for any environment, outdoors or indoors.

  • Communication with HART 4/20mA via interface wireless Bluetooth.

  • Software driver for over 370 existing HART instruments.

  • New driver can be developed upon customer specification or DDL source file.

  • Ability to install and run most Android applications.

  • Small size 150x75x13mm, 220gram, high grip rubberized enclosure.

  • 5” color display 1920x1080 pixels protected by Corning Gorilla Glass 5.

  • Long battery life, water and chock resistant to IP68, rugged to MIL-SPEC-810G.

CONF-PC

HART Configurator for Windows PC, computer not included Package include: 

  • 1 HART Communicator for Windows model CONF2018.

  • 1 HART MODEM model HiUSB for USB connector or 1 HART MODEM model HiBLUE for Bluetooth wireless.

  • 1 year free software maintenance and upgrade.

CONF-TABLET

HART Configurator for Windows TABLET PC Package include: 

  • 1 Tablet PC 8” color LCD display, with minimum 2GB RAM. Solid state DISK 29GB, CPU 1.44GHZ or better. Touch Screen, multi-media package, WI-FI, good battery life. Windows 10 (64bits), with convenience package. E-mail, internet, Skype, Photos, and many other amenities. Dimensional outline 215 x 125 x 8 mm.

  • 1 HART Communicator for Windows model CONF2018 (pre-installed).

  • 1 HART MODEM model HiUSB for USB connector, or    1 HART MODEM model HiBLUE for Bluetooth wireless.

  • 1 year free software maintenance and upgrade.

CONF-ROBUST

HART Configurator for Windows PC ruggedized platform Package include: 

  • 1 Tablet PC 8” color LCD display, with minimum 4GB RAM. Solid state DISK 58GG, CPU 1.44GHZ or better. Touch Screen, multi-media package, WI-FI, good battery life. Windows 10 (64bits), with convenience package. E-mail, internet,Skype, Photos, and many other amenities. Dimensional outline 240 x 155 x 30 mm. Resistance to impact up to 1 meter into wooded concrete floor. Water resistant, vibration resistant, extended temperature range. Excellent choice for outdoor and mobile installations.

  • 1 HART Communicator for Windows model CONF2018 (pre-installed)

  • 1 HART MODEM model HiUSB for USB connector or     1 HART MODEM model HiBLUE for Bluetooth wireless.

  • 1 year free software maintenance and upgrade.

 
 

Temperature

20201 Temperature Transmitter DIN/RAIL

The 20 201 offers a reliable solution to any temperature measurement application.  With the HART protocol the 20 201 is easily configurable via a PC or handheld configuration tool.  The 20 201 can be mounted easily on DIN rail. High precision electronics and advanced thermal compensation processing give excellent accuracy when reading from any of the industry standard RTD and Thermocouple sensors. In addition, the 20 201 can read any voltage source ranging from 1mV to 1V, and also possesses a software controllable current source enabling the device to read resistance values from any generic transducer.

  • 4-20 mA transmitter with HART communication.

  • Sensor type Resistance(RTD), Thermocouple(TC), Diode, Transistor. 

  • Single sensor: 2, 3, or 4 wire configurations. 

  • Dual Sensor: Differential, Average, Maximum or Minimum.

  • Voltage input for mV transducers.

  • Resistance input for Ohm transducers.

  • Sensor burn-out detection and alarm.

  • Sensor isolation 500V minimum.

  • DIN rail mounting.

20101 Temperature Transmitter Head Mount

The 20 101 offers a reliable solution to any temperature measurement application.  With the HART protocol the 20 101 is easily configurable via a PC or handheld configuration tool.  The 20 101 is provided in a standard head mount configuration suitable for installation in a wide variety of connection heads and housings. High precision electronics and advanced thermal compensation processing give excellent accuracy when reading from any of the industry standard RTD and Thermocouple sensors. In addition, the 20 101 can read any voltage source ranging from 1mV to 1V, and also possesses a software controllable current source enabling the device to read resistance values from any generic transducer.

  • ​4-20 mA transmitter with HART communication.

  • Sensor type Resistance(RTD), Thermocouple(TC), Diode, Transistor. 

  • Single sensor: 2, 3, or 4 wire configurations. 

  • Dual Sensor: Differential, Average, Maximum or Minimum.

  • Voltage input for mV transducers.

  • Resistance input for Ohm transducers.

  • Sensor burn-out detection and alarm.

  • Sensor isolation 500V minimum.

  • Fits into standard DIN Form B connection head.

914T Temperature Transmitter

The 914T is an industrial-grade differential pressure/level instrument ideal for use in process control. The mechanical sensor is based off capacitance transducer technology. The output provides a 4/20mA signal with HART communication. Powered by a high performance CPU this instrument is able to perform high precision thermal compensation plus many diagnosis procedures to assure its reliability. Differential Pressure/level transmitters have a limitless number of industrial applications. 

  • Temperature transmitter, mV, Ohm.

  • Low maintenance, easy calibration and configuration.

  • High precision input with minimum galvanic isolation of 500Vdc.

  • HART technology provides ease of setup and diagnostics during operation.

  • Compatible with Thermocouple or RTD sensors, and mV or Ohm type transducers

  • Support for differential thermal measurement or 2 measurement points.

Pressure

11101 Pressure Transmitter

The 11101 is a 4 - 20mA loop powered pressure transmitter capable of measuring gauge pressure for a variety of applications including liquids, gases and vapors. The 11 101s compact size, simplistic installation and economical cost make it an ideal choice for most pressure applications with measurement ranges up to 35 MPa. The 11101 can be mounted in any orientation and uses a 1/2” NPT or M20 x 1.5 process connection. 

  • Two-wire, 4-20 mA loop powered transmitter.

  • Measure Gauge Pressure for a variety of applications including liquids gases and vapors.

  • Pressure ranges from 0-2 Bar (200 KPa) up to 0-350 Bar (35 MPa).

  • Based on industry proven silicon sensor with long term stability.

  • Accuracy of less then 0.5% of full scale.

  • Input power of 24V ( +- 10%).

  • Low cost and compact design.

  • Easy installation.

  • No calibration required.

  • Configured to customer specifications prior to shipping .

11111 Pressure Transmitter

The 11 111 is a 4 - 20mA loop powered pressure transmitter capable of measuring gauge pressure for a variety of applications including liquids, gases and vapors. The 11111s compact size, simplistic installation and economical cost make it an ideal choice for most pressure applications with measurement ranges up to 35 MPa. The 11111 can be mounted in any orientation and uses a 1/2” NPT or M20 x 1.5 process connection.

  • Two-wire, 4-20 mA loop powered transmitter.

  • Measure Gauge Pressure for a variety of applications including liquids gases and vapors.

  • Pressure ranges from 0-2 Bar (200 KPa) up to 0-350 Bar (35 MPa).

  • Based on an economic ceramic sensor.

  • Accuracy of less then 0.5% of full scale.

  • Input power of 24V ( +10%).

  • Low cost and compact design.

  • Easy installation.

  • No calibration required.

  • Configured to customer specifications prior to shipping. 

11121 Pressure Transmitter

The 11 121 is a 4 - 20mA loop powered pressure transmitter capable of measuring gauge pressure for a variety of applications including liquids, gases and vapors. The 11121s thin film pressure transducers features a high pressure range along with reliable performance and accuracy. It is ideal for gas and liquid pressure measurement such as water, oil and non aggressive chemical liquid.

  • Two-wire, 4-20 mA loop powered transmitter.

  • Measure Gauge Pressure for a variety of applications including liquids, gases and vapors.

  • Ideal for high pressure application

  • Pressure ranges from 0-30 Bar up to 0-1200 Bar.

  • Accuracy of less then 0.5% of full scale. 

  • Input power of 12-30V.

  • Compact design.

  • Easy installation.

  • No calibration required.

  • Configured to customer specifications prior to shipping. 

11201 Pressure Transmitter

The 11 201 is an economical alternative to established differential pressure transmitters. It combines state of the art electronics and a high performance sensor; with a minimized need of material.
The result is a transmitter that can be used for all kind of industrial applications.

  • Smart two-wire, 4-20 mA loop powered differential pressure transmitter.

  • Ranges from 1.25 mbar up to 20 bar.

  • Overpressure protection up to 160 bar.

  • Fully configurable by HART-communication. 

914A Pressure Transmitter Absolute

The 914A is an industrial-grade absolute pressure instrument ideal for use in process control. The mechanical sensor is based off capacitance transducer technology. The output provides signal with HART communication. Powered by a high performance CPU this instrument is able to perform high precision thermal compensation plus many diagnosis procedures to assure its reliability.

  • Absolute pressure capacitive transmitter.

  • Low maintenance, quick calibration and configuration.

  • Installation directly into pressurized vessels.

  • HART technology provides ease of setup and diagnostics during operation.

  • Pressure port for thread 1/4 “NPT or 1/2” NPT adapter.

914D Pressure Transmitter Differential

The 914D is an industrial-grade differential pressure instrument ideal for use in process control. The mechanical sensor is based off capacitance transducer technology. The output provides a 4/20mA signal with HART communication. Powered by a high performance CPU this instrument is able to perform high precision thermal compensation plus many diagnosis procedures to assure its reliability.

  • Capacitance based differential pressure transmitter.

  • Low maintenance, quick calibration and configuration.

  • Installation directly into pressurized vessels.

  • HART technology provides ease of setup and diagnostics during operation.

  • Pressure port for thread 1/4 “NPT or 1/2” NPT adapter.

  • Pressure measurement from 20mbar to 200bar;

914G Pressure Transmitter Gauge

The 914G is an industrial-grade gauge pressure instrument ideal for use in process control. The mechanical sensor is based off pressure transmitter for stain gage resistance, built off a ceramic diaphragm that provides accuracy. The output provides a 4/20mA signal with HART communication.   Powered by a high performance CPU this instrument is able to perform high precision thermal compensation plus many diagnosis procedures to assure its reliability.  Differential Pressure transmitters have a limitless number of industrial applications.

  • HART technology 4/20mA ideal for acquisition of data and process control.

  • Pressure measurement from 4bar to 350bar.

  • Overpressure and static pressure suitable for industrial installations.

  • Compatible with many liquids, steam and gases.

  • Suitable for pressure measurement and level.

  • Compatible with tubes and pipe connections, option for flanges and remote seal.

914L Pressure/Level Transmitter

The 914L is an industrial-grade pressure instrument ideal for use in process control. The mechanical sensor is based off pressure transmitter for stain rage resistance, built off a ceramic diaphragm that provides accuracy and thickness. The output provides a 4/20mA signal with HART communication. Powered by a high performance CPU this instrument is able to perform high precision thermal compensation plus many diagnosis procedures to assure its reliability. Differential Pressure transmitters have a limitless number of industrial applications. 

  • Capacitive level transmitter for liquids.

  • Low maintenance, easy calibration and configuration.

  • Easy installation directly into pressurized vessels.

  • HART technology provides ease of setup and diagnostics during operation.

  • Easy installation for DIN or ASME flanges.

 

Level

30101 GWR Level Transmitter

The 30101 is an intelligent HART level transmitter designed to detect liquid or solid level in vessels. The 30101 sends and receives radio frequency pulses through the probe using guided wave radar (GWR) techniques for the purpose of level detection. These pulses travel down the probe until the product surface is reached and then reflected and received back at the device. Using Time Domain Reflectometry (TDR) principles, the 30101 is able to effectively calculate the level of the measured product from these received pulses. The 30101 level information can be output as a user configurable 4-20mA signal or monitored remotely via the HART protocol.

  • Smart two-wire, 4-20 mA loop power transmitter with HART communication.

  • Measures level up to 14m using guided wave radar principles.

  • Operates over a large range of temperature and pressure conditions for compatibility with a vast amount of applications.

  • Ability to measure liquids and solids.

  • Virtually unaffected by process conditions such as changes in temperature, pressure, density or conductivity.

  • Impervious to ambient influences such as steam, dust, vapor, buildup and condensation.

  • Available in cable, rod or coax configurations.

  • ​Low maintenance costs due to no moving parts.

914R GWR Radar Level Transmitter

The 914R is an intelligent HART level transmitter designed to detect liquid or solid levels in vessels. The 30 301 sends and receives radio frequency pulses through the probe using guided wave radar (GWR) techniques for the purpose of level detection. These pulses travel down the probe until the product surface is reached and are then reflected and received back at the device. Using Time Domain Reflectometry (TDR) principles, the 914R is able to effectively calculate the level of the measured product from these received pulses. The 914R level information can be output as a user configurable 4-20mA signal or monitored remotely via the HART protocol.

  • Guided wave radar level transmitter.

  • Low maintenance, auto calibrated references.

  • Easy installation, directly in tanks or auxiliary vessels.

  • HART technology provides ease of setup and diagnostics during operation.

  • Easy installation, 1 1/2 “NPT thread enables numerous options.

914L Pressure/Level Transmitter

The 914L is an industrial-grade pressure instrument ideal for use in process control. The mechanical sensor is based off pressure transmitter for stain rage resistance, built off a ceramic diaphragm that provides accuracy and thickness. The output provides a 4/20mA signal with HART communication. Powered by a high performance CPU this instrument is able to perform high precision thermal compensation plus many diagnosis procedures to assure its reliability. Differential Pressure transmitters have a limitless number of industrial applications. 

  • Capacitive level transmitter for liquids.

  • Low maintenance, easy calibration and configuration.

  • Easy installation directly into pressurized vessels.

  • HART technology provides ease of setup and diagnostics during operation.

  • Easy installation for DIN or ASME flanges.

 

Accessories

RP302 Fieldbus Repeater

The Fieldbus repeater RP302 is mainly designed to extent the network length for industrial network, can be used on either Foundation Fieldbus or Profibus PA. 
Its unique ASIC based signal analyzer is geared to manage Fieldbus traffic between 2 bi-directional ports for Network 0 and 1, the galvanic isolation isolation will allow communication with different electrical environments, or areas with different grounding circuits, for instance network leading to other buildings or inside areas restricted by EMI emission.
The RP302 is adequate for expanding a segment beyond the limit of 1900m, and also to add new instruments into a pre-existing Fieldbus segment without any changes into the original conditions of the network.

  • Compatible with IEC 61158-2, 31.25 kb/s, FOUNDATION Fieldbus H1, and Profibus PA

  • Allow extension of the  network length beyond the 1900m Fieldbus specification.

  • Built-in terminators jumper selectable on both sides.

  • Low leakage current ( < 1 uAdc ) will not interfere with network power.

  • Galvanic isolation between networks will block noise-jitter propagation.

  • Small size and light weight enclosure for DIN mounting rail.

RP312 Fieldbus Repeater

The Fieldbus repeater RP312 is mainly designed to extent the network length for industrial network, can be used on either Foundation Fieldbus or Profibus PA. 
Its unique ASIC based signal analyzer is geared to manage Fieldbus traffic between 2 bi-directional ports for Network 0 and 1, the galvanic isolation will allow communication with different electrical environments, or areas with different grounding circuits, for instance network leading to other buildings or inside areas restricted by EMI emission.
The RP312 is adequate for expanding a segment beyond the limit of 1900m, and also to add new instruments into a pre-existing Fieldbus segment without any changes into the original conditions of the network. The RP312 has also a Fieldbus power supply with integral terminator built in the network 1 port, eliminating the need for external components for the extra run.

  • Compatible with IEC 61158-2, 31.25 kb/s, FOUNDATION Fieldbus H1, and Profibus PA

  • Allow extension of the  network length beyond the 1900m Fieldbus specification.

  • Built-in Fieldbus power conditioner for network 1, allowing up to 125mA @18Vdc.

  • Built-in terminator on network 1 port.

  • Low leakage current ( < 1 uAdc ) will not interfere with network power.

  • Galvanic isolation between networks will block noise-jitter propagation.

  • Small size and light weight enclosure for DIN mounting rail.