RP302 RP312
The Fieldbus repeater RP302 is mainly designed to extent the network length for industrial network, can be used on either Foundation Fieldbus or Profibus PA.
Its unique ASIC based signal analyzer is geared to manage Fieldbus traffic between 2 bi-directional ports for Network 0 and 1, the galvanic isolation isolation will allow communication with different electrical environments, or areas with different grounding circuits, for instance network leading to other buildings or inside areas restricted by EMI emission.
The RP302 is adequate for expanding a segment beyond the limit of 1900m, and also to add new instruments into a pre-existing Fieldbus segment without any changes into the original conditions of the network.
The Fieldbus repeater RP302 is mainly designed to extent the network length for industrial network, can be used on either Foundation Fieldbus or Profibus PA.
Its unique ASIC based signal analyzer is geared to manage Fieldbus traffic between 2 bi-directional ports for Network 0 and 1, the galvanic isolation isolation will allow communication with different electrical environments, or areas with different grounding circuits, for instance network leading to other buildings or inside areas restricted by EMI emission.
The RP302 is adequate for expanding a segment beyond the limit of 1900m, and also to add new instruments into a pre-existing Fieldbus segment without any changes into the original conditions of the network.
The Fieldbus repeater RP312 is mainly designed to extent the network length for industrial network, can be used on either Foundation Fieldbus or Profibus PA.
Its unique ASIC based signal analyzer is geared to manage Fieldbus traffic between 2 bi-directional ports for Network 0 and 1, the galvanic isolation will allow communication with different electrical environments, or areas with different grounding circuits, for instance network leading to other buildings or inside areas restricted by EMI emission.
The RP312 is adequate for expanding a segment beyond the limit of 1900m, and also to add new instruments into a pre-existing Fieldbus segment without any changes into the original conditions of the network. The RP312 has also a Fieldbus power supply with integral terminator built in the network 1 port, eliminating the need for external components for the extra run.
-
Compatible with IEC 61158-2, 31.25 kb/s, FOUNDATION Fieldbus H1, and Profibus PA
-
Allow extension of the network length beyond the 1900m Fieldbus specification.
-
Built-in Fieldbus power conditioner for network 1, allowing up to 125mA @18Vdc.
-
Built-in terminator on network 1 port.
-
Low leakage current ( < 1 uAdc ) will not interfere with network power.
-
Galvanic isolation between networks will block noise-jitter propagation.
-
Small size and light weight enclosure for DIN mounting rail.
