SEMICONDUCTORS
The HT2012 is a CMOS modem designed for HART field instruments and associated interfaces. This component require some external active and passive elements to provide the functions needed to satisfy HART physical layer requirements including modulation, demodulation, receive filtering, carrier detect, and transmit signal shaping.
The HT2012 is ideal for low power field instruments (4 to 20mA) and can be used also for computer interfaces for data acquisition and control. It uses phase continuous frequency shift keying (FSK) at 1200 bits per second as specified in HART protocol. It work in half duplex mode in order to save power.
-
Ideal for HART field instruments, configurators, data acquisition and digital control
-
Bell 202 FSK at 1200 and 2200 Hz, nominal 1200 bits per second, half duplex.
-
CMOS technology, working from 3.0 to 5.5V Power Supply, extra low current 40uA.
-
Transmit wave shaping, receiver band pass filter, with few external components.
-
Work with most micro controllers available in the market, I/O CMOS/TTL compatible.
-
Industrial temperature -40 to 85C, Pb-Free chip packaging.
-
Based on HART physical layer.
The HT2015 is a mixed signal CMOS modem designed for HART field instruments and associated interfaces. This component require few external passive elements to provide the functions needed to satisfy HART physical layer requirements. It have built in circuitry for modulation, demodulation, receive filtering, carrier detect, and transmit signal shaping.
The HT2015 is ideal for low power field instruments (4 to 20mA) and can be used also for computer interfaces for data acquisition and control. It uses phase continuous frequency shift keying (FSK) at 1200 bits per second as specified in HART protocol. It work in half duplex mode to save power.
-
Ideal for HART field instruments, configurators, data acquisition and digital control.
-
Bell 202 FSK at 1200 and 2200 Hz, nominal 1200 bits per second, half duplex.
-
Mixed signal CMOS technology, working from 3.0 to 5.5V Power Supply.
-
Built in transmit wave shaping, receiver band pass filter, with few external passive components.
-
Work with most micro controllers available in the market, I/O CMOS/TTL compatible.
-
Industrial temperature -40 to 85C, Pb-Free chip packaging.
-
Based on HART physical layer.
